{"title":"V2 - UTV Rod Ends, Uniballs and Bearing Components","description":null,"products":[{"product_id":"avid-jmxl14t","title":"JMXL14T 3-Piece Chromoly Rod End - 7\/8-14 LH Thread | AVID Racing","description":"\u003ch2\u003eJMXL14T 3-Piece Chromoly Rod End - 7\/8-14 LH Thread\u003c\/h2\u003e\n\u003cp\u003eJMXL14T is a 3-piece male chromoly rod end with a 7\/8-14 left-hand thread and a 0.875 inch bore.\u003c\/p\u003e\n\u003cp\u003eThis PTFE-lined rod end uses alloy-steel construction with a heat-treated, hard-chrome-plated ball and a heat-treated, zinc-plated and chromate-treated body and race.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JMXL14T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rod End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing ID \/ Bore:\u003c\/strong\u003e 0.875 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing OD \/ Head Diameter:\u003c\/strong\u003e 2.000 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing Width \/ Ball Width:\u003c\/strong\u003e 0.875 in \/ 0.770 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall Diameter \/ Ball Radius Reference:\u003c\/strong\u003e 1.375 in ball diameter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 7\/8-14\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Left-hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Length:\u003c\/strong\u003e 1.875 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenterline Length:\u003c\/strong\u003e 3.375 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMisalignment Angle:\u003c\/strong\u003e 12 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 45,051 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy steel \/ chromoly rod-end construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc-plated chromate body and race; hard-chrome-plated ball\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e 3-piece male rod end, PTFE lined\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e 0.91 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify thread size, thread direction, bore size, and required misalignment before ordering. Final fitment depends on the mating hardware, mounting width, and application geometry.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":46092662112480,"sku":"AVID-JMXL14T","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/AVID-JMXL14T_01_b2ad1795-15be-4af7-a404-97c8d0ce7dc0.png?v=1763428041"},{"product_id":"avid-jmxl12t","title":"JMXL12T 3-Piece Chromoly Rod End - 3\/4-16 LH Thread | AVID Racing","description":"\u003ch2\u003eJMXL12T 3-Piece Chromoly Rod End - 3\/4-16 LH Thread\u003c\/h2\u003e\n\u003cp\u003eJMXL12T is a 3-piece male chromoly rod end with a 3\/4-16 left-hand thread and a 0.750 inch bore.\u003c\/p\u003e\n\u003cp\u003eThis PTFE-lined rod end uses alloy-steel construction with a heat-treated, hard-chrome-plated ball and a heat-treated, zinc-plated and chromate-treated body and race.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JMXL12T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rod End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing ID \/ Bore:\u003c\/strong\u003e 0.750 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing OD \/ Head Diameter:\u003c\/strong\u003e 1.750 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing Width \/ Ball Width:\u003c\/strong\u003e 0.875 in \/ 0.687 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall Diameter \/ Ball Radius Reference:\u003c\/strong\u003e 1.312 in ball diameter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 3\/4-16\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Left-hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Length:\u003c\/strong\u003e 1.750 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenterline Length:\u003c\/strong\u003e 2.875 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMisalignment Angle:\u003c\/strong\u003e 14 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 28,090 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy steel \/ chromoly rod-end construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc-plated chromate body and race; hard-chrome-plated ball\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e 3-piece male rod end, PTFE lined\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e 0.60 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify thread size, thread direction, bore size, and required misalignment before ordering. Final fitment depends on the mating hardware, mounting width, and application geometry.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":46095350366432,"sku":"AVID-JMXL12T","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/AVID-JMXL12T_01_a1e13fef-28e8-4648-a57f-9b22ad95e310.png?v=1763428067"},{"product_id":"avid-jmx12t","title":"JMX12T 3-Piece Chromoly Rod End - 3\/4-16 RH Thread | AVID Racing","description":"\u003ch2\u003eJMX12T 3-Piece Chromoly Rod End - 3\/4-16 RH Thread\u003c\/h2\u003e\n\u003cp\u003eJMX12T is a 3-piece male chromoly rod end with a 3\/4-16 right-hand thread and a 0.750 inch bore.\u003c\/p\u003e\n\u003cp\u003eThis PTFE-lined rod end uses alloy-steel construction with a heat-treated, hard-chrome-plated ball and a heat-treated, zinc-plated and chromate-treated body and race.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JMX12T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rod End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing ID \/ Bore:\u003c\/strong\u003e 0.750 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing OD \/ Head Diameter:\u003c\/strong\u003e 1.750 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing Width \/ Ball Width:\u003c\/strong\u003e 0.875 in \/ 0.687 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall Diameter \/ Ball Radius Reference:\u003c\/strong\u003e 1.312 in ball diameter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 3\/4-16\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Right-hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Length:\u003c\/strong\u003e 1.750 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenterline Length:\u003c\/strong\u003e 2.875 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMisalignment Angle:\u003c\/strong\u003e 14 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 28,090 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy steel \/ chromoly rod-end construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc-plated chromate body and race; hard-chrome-plated ball\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e 3-piece male rod end, PTFE lined\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e 0.60 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify thread size, thread direction, bore size, and required misalignment before ordering. Final fitment depends on the mating hardware, mounting width, and application geometry.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":46095350431968,"sku":"AVID-JMX12T","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/AVID-JMX12T_01.png?v=1763428069"},{"product_id":"avid-jmxl10t","title":"JMXL10T 3-Piece Chromoly Rod End - 5\/8-18 LH Thread | AVID Racing","description":"\u003ch2\u003eJMXL10T 3-Piece Chromoly Rod End - 5\/8-18 LH Thread\u003c\/h2\u003e\n\u003cp\u003eJMXL10T is a 3-piece male chromoly rod end with a 5\/8-18 left-hand thread and a 0.625 inch bore.\u003c\/p\u003e\n\u003cp\u003eThis PTFE-lined rod end uses alloy-steel construction with a heat-treated, hard-chrome-plated ball and a heat-treated, zinc-plated and chromate-treated body and race.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JMXL10T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rod End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing ID \/ Bore:\u003c\/strong\u003e 0.625 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing OD \/ Head Diameter:\u003c\/strong\u003e 1.500 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing Width \/ Ball Width:\u003c\/strong\u003e 0.750 in \/ 0.562 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall Diameter \/ Ball Radius Reference:\u003c\/strong\u003e 1.125 in ball diameter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 5\/8-18\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Left-hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Length:\u003c\/strong\u003e 1.625 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenterline Length:\u003c\/strong\u003e 2.625 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMisalignment Angle:\u003c\/strong\u003e 16 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 17,959 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy steel \/ chromoly rod-end construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc-plated chromate body and race; hard-chrome-plated ball\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e 3-piece male rod end, PTFE lined\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e 0.38 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify thread size, thread direction, bore size, and required misalignment before ordering. Final fitment depends on the mating hardware, mounting width, and application geometry.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":46095351382240,"sku":"AVID-JMXL10T","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/AVID-JMXL10T_01_1.png?v=1773765581"},{"product_id":"avid-jmx10t","title":"JMX10T 3-Piece Chromoly Rod End - 5\/8-18 RH Thread | AVID Racing","description":"\u003ch2\u003eJMX10T 3-Piece Chromoly Rod End - 5\/8-18 RH Thread\u003c\/h2\u003e\n\u003cp\u003eJMX10T is a 3-piece male chromoly rod end with a 5\/8-18 right-hand thread and a 0.625 inch bore.\u003c\/p\u003e\n\u003cp\u003eThis PTFE-lined rod end uses alloy-steel construction with a heat-treated, hard-chrome-plated ball and a heat-treated, zinc-plated and chromate-treated body and race.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JMX10T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rod End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing ID \/ Bore:\u003c\/strong\u003e 0.625 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing OD \/ Head Diameter:\u003c\/strong\u003e 1.500 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing Width \/ Ball Width:\u003c\/strong\u003e 0.750 in \/ 0.562 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall Diameter \/ Ball Radius Reference:\u003c\/strong\u003e 1.125 in ball diameter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 5\/8-18\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Right-hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Length:\u003c\/strong\u003e 1.625 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenterline Length:\u003c\/strong\u003e 2.625 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMisalignment Angle:\u003c\/strong\u003e 16 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 17,959 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy steel \/ chromoly rod-end construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc-plated chromate body and race; hard-chrome-plated ball\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e 3-piece male rod end, PTFE lined\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e 0.38 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify thread size, thread direction, bore size, and required misalignment before ordering. Final fitment depends on the mating hardware, mounting width, and application geometry.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":46095351939296,"sku":"AVID-JMX10T","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/AVID-JMX10T_01.png?v=1763428082"},{"product_id":"avid-jmx14t","title":"JMX14T 3-Piece Chromoly Rod End - 7\/8-14 RH Thread | AVID Racing","description":"\u003ch2\u003eJMX14T 3-Piece Chromoly Rod End - 7\/8-14 RH Thread\u003c\/h2\u003e\n\u003cp\u003eJMX14T is a 3-piece male chromoly rod end with a 7\/8-14 right-hand thread and a 0.875 inch bore.\u003c\/p\u003e\n\u003cp\u003eThis PTFE-lined rod end uses alloy-steel construction with a heat-treated, hard-chrome-plated ball and a heat-treated, zinc-plated and chromate-treated body and race.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JMX14T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rod End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing ID \/ Bore:\u003c\/strong\u003e 0.875 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing OD \/ Head Diameter:\u003c\/strong\u003e 2.000 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing Width \/ Ball Width:\u003c\/strong\u003e 0.875 in \/ 0.770 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall Diameter \/ Ball Radius Reference:\u003c\/strong\u003e 1.375 in ball diameter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 7\/8-14\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Right-hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Length:\u003c\/strong\u003e 1.875 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenterline Length:\u003c\/strong\u003e 3.375 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMisalignment Angle:\u003c\/strong\u003e 12 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 45,051 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy steel \/ chromoly rod-end construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc-plated chromate body and race; hard-chrome-plated ball\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e 3-piece male rod end, PTFE lined\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e 0.91 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify thread size, thread direction, bore size, and required misalignment before ordering. Final fitment depends on the mating hardware, mounting width, and application geometry.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":46095353118944,"sku":"AVID-JMX14T","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/AVID-JMXL14T_01_35c2fe9c-7c88-4806-9670-b03f583aa7c0.png?v=1763428092"},{"product_id":"avid-wpb16t","title":"WPB16T Wide Series Chromoly Uniball, 1\" ID x 2-1\/8\" OD | AVID Racing","description":"\u003ch2\u003eWPB16T Wide Series Chromoly Uniball, 1\" ID x 2-1\/8\" OD | AVID Racing\u003c\/h2\u003e\n\u003cp\u003eWPB16T is a wide series chromoly uniball spherical bearing with a 1\" inner diameter and 2-1\/8\" outer diameter. It is used for compatible uniball cups, housings, and fabricated mounting points sized for this bearing envelope.\u003c\/p\u003e\n\u003cp\u003eThis listing is for the bearing only. Cups, retaining rings, misalignment spacers, and mounting hardware are not included unless listed separately.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e WPB16T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEquivalent Crossover:\u003c\/strong\u003e WSSX16T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Wide series chromoly uniball \/ spherical bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing ID:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing OD:\u003c\/strong\u003e 2-1\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Width:\u003c\/strong\u003e 1.375\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall Diameter:\u003c\/strong\u003e 1.875\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 104,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Axial Load Rating:\u003c\/strong\u003e 19,300 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Oscillating Radial Load:\u003c\/strong\u003e 56,250 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e .970 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One uniball bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify the bearing ID, OD, bearing width, cup size, spacer stack, and installed width before ordering. Final fitment depends on the cup or housing, spacers, and application-specific hardware being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":46280780316896,"sku":"AVID-WPB16T","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/AVID-WPB16T_01.png?v=1763428194"},{"product_id":"avid-wpb12t","title":"WPB12T Wide Series Chromoly Uniball, 3\/4\" ID x 1-3\/8\" OD | AVID Racing","description":"\u003ch2\u003eWPB12T Wide Series Chromoly Uniball, 3\/4\" ID x 1-3\/8\" OD | AVID Racing\u003c\/h2\u003e\n\u003cp\u003eWPB12T is a wide series chromoly uniball spherical bearing with a 3\/4\" inner diameter and 1-3\/8\" outer diameter. It is used for compatible uniball cups, housings, and fabricated mounting points sized for this bearing envelope.\u003c\/p\u003e\n\u003cp\u003eThis listing is for the bearing only. Cups, retaining rings, misalignment spacers, and mounting hardware are not included unless listed separately.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e WPB12T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEquivalent Crossover:\u003c\/strong\u003e WSSX12T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Wide series chromoly uniball \/ spherical bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing ID:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing OD:\u003c\/strong\u003e 1-3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Width:\u003c\/strong\u003e .875\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall Diameter:\u003c\/strong\u003e 1.250\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 37,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Axial Load Rating:\u003c\/strong\u003e 7,730 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Oscillating Radial Load:\u003c\/strong\u003e 26,200 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e .240 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One uniball bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify the bearing ID, OD, bearing width, cup size, spacer stack, and installed width before ordering. Final fitment depends on the cup or housing, spacers, and application-specific hardware being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":46280781070560,"sku":"AVID-WPB12T","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/AVID-WPB12T_01.png?v=1763428199"},{"product_id":"avid-wpb14t","title":"WPB14T Wide Series Chromoly Uniball, 7\/8\" ID x 1-5\/8\" OD | AVID Racing","description":"\u003ch2\u003eWPB14T Wide Series Chromoly Uniball, 7\/8\" ID x 1-5\/8\" OD | AVID Racing\u003c\/h2\u003e\n\u003cp\u003eWPB14T is a wide series chromoly uniball spherical bearing with a 7\/8\" inner diameter and 1-5\/8\" outer diameter. It is used for compatible uniball cups, housings, and fabricated mounting points sized for this bearing envelope.\u003c\/p\u003e\n\u003cp\u003eThis listing is for the bearing only. Cups, retaining rings, misalignment spacers, and mounting hardware are not included unless listed separately.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e WPB14T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEquivalent Crossover:\u003c\/strong\u003e WSSX14T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Wide series chromoly uniball \/ spherical bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing ID:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing OD:\u003c\/strong\u003e 1-5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Width:\u003c\/strong\u003e .875\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall Diameter:\u003c\/strong\u003e 1.375\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 65,200 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Axial Load Rating:\u003c\/strong\u003e 10,800 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Oscillating Radial Load:\u003c\/strong\u003e 33,600 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e .350 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One uniball bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify the bearing ID, OD, bearing width, cup size, spacer stack, and installed width before ordering. Final fitment depends on the cup or housing, spacers, and application-specific hardware being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":46280781365472,"sku":"AVID-WPB14T","price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/AVID-WPB14T_01.png?v=1763428203"},{"product_id":"avid-wpb10t","title":"WPB10T Wide Series Chromoly Uniball, 5\/8\" ID x 1-3\/16\" OD | AVID Racing","description":"\u003ch2\u003eWPB10T Wide Series Chromoly Uniball, 5\/8\" ID x 1-3\/16\" OD | AVID Racing\u003c\/h2\u003e\n\u003cp\u003eWPB10T is a wide series chromoly uniball spherical bearing with a 5\/8\" inner diameter and 1-3\/16\" outer diameter. It is used for compatible uniball cups, housings, and fabricated mounting points sized for this bearing envelope.\u003c\/p\u003e\n\u003cp\u003eThis listing is for the bearing only. Cups, retaining rings, misalignment spacers, and mounting hardware are not included unless listed separately.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e WPB10T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEquivalent Crossover:\u003c\/strong\u003e WSSX10T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Wide series chromoly uniball \/ spherical bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing ID:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing OD:\u003c\/strong\u003e 1-3\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Width:\u003c\/strong\u003e .750\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall Diameter:\u003c\/strong\u003e 1.062\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 29,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Axial Load Rating:\u003c\/strong\u003e 6,130 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Oscillating Radial Load:\u003c\/strong\u003e 20,250 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e .160 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One uniball bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify the bearing ID, OD, bearing width, cup size, spacer stack, and installed width before ordering. Final fitment depends on the cup or housing, spacers, and application-specific hardware being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":46280781627616,"sku":"AVID-WPB10T","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/AVID-WPB10T_01_1.png?v=1771590533"},{"product_id":"avid-jnr14s","title":"JNR14S Chromoly Steel Jam Nut, 7\/8\" Right Hand Thread | AVID Racing","description":"\u003ch2\u003eJNR14S Chromoly Steel Jam Nut, 7\/8\" Right Hand Thread | AVID Racing\u003c\/h2\u003e\n\n\u003cp\u003eJNR14S is a chromoly steel jam nut with a 7\/8\" right-hand thread. It is used with compatible right-hand threaded rod ends, heim joints, and related bearing-support assemblies that use this thread size.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for the jam nut only. Rod ends, misalignment spacers, mounting hardware, and other related components are not included unless listed separately.\u003c\/p\u003e\n\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JNR14S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Chromoly steel jam nut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Right hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chromoly steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One jam nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify thread size, thread direction, rod end compatibility, and application-specific hardware requirements before ordering. Final fitment depends on the threaded component and assembly being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":46280860893408,"sku":"AVID-JNR14S","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/AVID-JNR14S_01.png?v=1763428211"},{"product_id":"avid-jnr12s","title":"JNR12S Chromoly Steel Jam Nut, 3\/4-16 Right Hand Thread | AVID Racing","description":"\u003ch2\u003eJNR12S Chromoly Steel Jam Nut, 3\/4-16 Right Hand Thread | AVID Racing\u003c\/h2\u003e\n\n\u003cp\u003eJNR12S is a chromoly steel jam nut with a 3\/4-16 right-hand thread. It is used with compatible right-hand threaded rod ends, heim joints, and related bearing-support assemblies that use this thread size.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for the jam nut only. Rod ends, misalignment spacers, mounting hardware, and other related components are not included unless listed separately.\u003c\/p\u003e\n\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JNR12S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Chromoly steel jam nut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 3\/4-16\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Right hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chromoly steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One jam nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify thread size, thread direction, rod end compatibility, and application-specific hardware requirements before ordering. Final fitment depends on the threaded component and assembly being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":46280863285472,"sku":"AVID-JNR12S","price":1.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/AVID-JNR12S_01_3cb34359-dc2d-42b0-a7b9-2be764239418.png?v=1763428215"},{"product_id":"avid-jnl14s","title":"JNL14S Chromoly Steel Jam Nut, 7\/8\" Left Hand Thread | AVID Racing","description":"\u003ch2\u003eJNL14S Chromoly Steel Jam Nut, 7\/8\" Left Hand Thread | AVID Racing\u003c\/h2\u003e\n\n\u003cp\u003eJNL14S is a chromoly steel jam nut with a 7\/8\" left-hand thread. It is used with compatible left-hand threaded rod ends, heim joints, and related bearing-support assemblies that use this thread size.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for the jam nut only. Rod ends, misalignment spacers, mounting hardware, and other related components are not included unless listed separately.\u003c\/p\u003e\n\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JNL14S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Chromoly steel jam nut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Left hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chromoly steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One jam nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify thread size, thread direction, rod end compatibility, and application-specific hardware requirements before ordering. Final fitment depends on the threaded component and assembly being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":46280866463968,"sku":"AVID-JNL14S","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/AVID-JNL12S_01.png?v=1763428219"},{"product_id":"avid-jnl12s","title":"JNL12S Chromoly Steel Jam Nut, 3\/4-16 Left Hand Thread | AVID Racing","description":"\u003ch2\u003eJNL12S Chromoly Steel Jam Nut, 3\/4-16 Left Hand Thread | AVID Racing\u003c\/h2\u003e\n\n\u003cp\u003eJNL12S is a chromoly steel jam nut with a 3\/4-16 left-hand thread. It is used with compatible left-hand threaded rod ends, heim joints, and related bearing-support assemblies that use this thread size.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for the jam nut only. Rod ends, misalignment spacers, mounting hardware, and other related components are not included unless listed separately.\u003c\/p\u003e\n\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JNL12S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Chromoly steel jam nut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 3\/4-16\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Left hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chromoly steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One jam nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify thread size, thread direction, rod end compatibility, and application-specific hardware requirements before ordering. Final fitment depends on the threaded component and assembly being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":46280868724960,"sku":"AVID-JNL12S","price":1.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/AVID-JNL12S_01_d0ee0897-3e2c-4c4e-a981-65924a89aaf4.png?v=1763428222"},{"product_id":"avid-jnl10s","title":"JNL10S Chromoly Steel Jam Nut, 5\/8-18 Left Hand Thread | AVID Racing","description":"\u003ch2\u003eJNL10S Chromoly Steel Jam Nut, 5\/8-18 Left Hand Thread | AVID Racing\u003c\/h2\u003e\n\n\u003cp\u003eJNL10S is a chromoly steel jam nut with a 5\/8-18 left-hand thread. It is used with compatible left-hand threaded rod ends, heim joints, and related bearing-support assemblies that use this thread size.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for the jam nut only. Rod ends, misalignment spacers, mounting hardware, and other related components are not included unless listed separately.\u003c\/p\u003e\n\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JNL10S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Chromoly steel jam nut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 5\/8-18\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Left hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chromoly steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One jam nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify thread size, thread direction, rod end compatibility, and application-specific hardware requirements before ordering. Final fitment depends on the threaded component and assembly being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":46280872034528,"sku":"AVID-JNL10S","price":1.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/AVID-JNL10S_01.png?v=1763428225"},{"product_id":"avid-jnr10s","title":"JNR10S Chromoly Steel Jam Nut, 5\/8-18 Right Hand Thread | AVID Racing","description":"\u003ch2\u003eJNR10S Chromoly Steel Jam Nut, 5\/8-18 Right Hand Thread | AVID Racing\u003c\/h2\u003e\n\n\u003cp\u003eJNR10S is a chromoly steel jam nut with a 5\/8-18 right-hand thread. It is used with compatible right-hand threaded rod ends, heim joints, and related bearing-support assemblies that use this thread size.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for the jam nut only. Rod ends, misalignment spacers, mounting hardware, and other related components are not included unless listed separately.\u003c\/p\u003e\n\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JNR10S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Chromoly steel jam nut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 5\/8-18\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Right hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chromoly steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One jam nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify thread size, thread direction, rod end compatibility, and application-specific hardware requirements before ordering. Final fitment depends on the threaded component and assembly being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":46288293232864,"sku":"AVID-JNR10S","price":1.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/AVID-JNR10S_01.png?v=1763428234"},{"product_id":"avid-yxz-fpivkit","title":"Yamaha YXZ1000 Complete Front Pivot Service Kit | AVID Racing","description":"\u003ch2\u003eYamaha YXZ1000 Complete Front Pivot Service Kit | AVID Racing\u003c\/h2\u003e\n\u003cp\u003e36 piece Complete Front Pivot Service Kit for AVID Racing's Yamaha YXZ1000 Suspension Kits.\u003c\/p\u003e\n\u003cp\u003eIncludes all uniball bearings, rod ends, jam nuts, and misalignments for a complete install. \u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":46372875632864,"sku":"AVID-YXZ-FPIVKIT","price":295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/avid-yxz-fpivkit_01.png?v=1764046357"},{"product_id":"avid-jmx16t","title":"JMX16T 3-Piece Chromoly Rod End - 1-1\/4-12 RH Thread | AVID Racing","description":"\u003ch2\u003eJMX16T 3-Piece Chromoly Rod End - 1-1\/4-12 RH Thread\u003c\/h2\u003e\n\u003cp\u003eJMX16T is a 3-piece male chromoly rod end with a 1-1\/4-12 right-hand thread and a 1.000 inch bore.\u003c\/p\u003e\n\u003cp\u003eThis PTFE-lined rod end uses alloy-steel construction with a heat-treated, hard-chrome-plated ball and a heat-treated, zinc-plated and chromate-treated body and race.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JMX16T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rod End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing ID \/ Bore:\u003c\/strong\u003e 1.000 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing OD \/ Head Diameter:\u003c\/strong\u003e 2.950 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing Width \/ Ball Width:\u003c\/strong\u003e 1.375 in \/ 1.015 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall Diameter \/ Ball Radius Reference:\u003c\/strong\u003e 1.875 in ball diameter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 1-1\/4-12\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Right-hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Length:\u003c\/strong\u003e 2.500 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenterline Length:\u003c\/strong\u003e 4.500 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMisalignment Angle:\u003c\/strong\u003e 17 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 107,182 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy steel \/ chromoly rod-end construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc-plated chromate body and race; hard-chrome-plated ball\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e 3-piece male rod end, PTFE lined\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e 2.74 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify thread size, thread direction, bore size, and required misalignment before ordering. Final fitment depends on the mating hardware, mounting width, and application geometry.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":47618540896480,"sku":"AVID-JMX16T","price":59.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/rodends_01_1.png?v=1773765616"},{"product_id":"avid-jnr16s","title":"JNR16S Chromoly Steel Jam Nut, 1.25\" Right Hand Thread | AVID Racing","description":"\u003ch2\u003eJNR16S Chromoly Steel Jam Nut, 1.25\" Right Hand Thread | AVID Racing\u003c\/h2\u003e\n\n\u003cp\u003eJNR16S is a chromoly steel jam nut with a 1.25\" right-hand thread. It is used with compatible right-hand threaded rod ends, heim joints, and related bearing-support assemblies that use this thread size.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for the jam nut only. Rod ends, misalignment spacers, mounting hardware, and other related components are not included unless listed separately.\u003c\/p\u003e\n\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JNR16S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Chromoly steel jam nut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 1.25\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Right hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chromoly steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One jam nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify thread size, thread direction, rod end compatibility, and application-specific hardware requirements before ordering. Final fitment depends on the threaded component and assembly being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":47618554265824,"sku":"AVID-JNR16S","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/jamnuts_01_729258af-88bb-45b9-9488-e8b9a9be1ff9.png?v=1764046251"},{"product_id":"avid-com10t-f1","title":"COM10T-F1 Chromoly Uniball, 5\/8\" ID x 1-3\/16\" OD | AVID Racing","description":"\u003ch2\u003eCOM10T-F1 Chromoly Uniball, 5\/8\" ID x 1-3\/16\" OD | AVID Racing\u003c\/h2\u003e\n\n\u003cp\u003eCOM10T-F1 is a chromoly uniball \/ spherical bearing with a 5\/8\" inner diameter and 1-3\/16\" outer diameter.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for the bearing only. Cups, retaining rings, misalignment spacers, and mounting hardware are not included unless listed separately.\u003c\/p\u003e\n\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e COM10T-F1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Chromoly uniball \/ spherical bearing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing ID:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing OD:\u003c\/strong\u003e 1-3\/16\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing Width:\u003c\/strong\u003e .625\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall Diameter:\u003c\/strong\u003e .968\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 21,280 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chromoly\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e PTFE-lined COM-T style spherical bearing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":53060631920864,"sku":"AVID-COM10T-F1","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/Uniballs-ImageComingSoon.png?v=1782680529"},{"product_id":"avid-jnl10a","title":"JNL10A Jam Nut, 5\/8-18 Left Hand Thread, 7075 Aluminum, Clear Anodized | AVID Racing","description":"\u003ch2\u003eJNL10A Jam Nut, 5\/8-18 Left Hand Thread, 7075 Aluminum, Clear Anodized | AVID Racing\u003c\/h2\u003e\n\u003cp\u003eJNL10A is a jam nut for 5\/8-18 left hand threaded rod ends, links, and adjusters.\u003c\/p\u003e\n\u003cp\u003eThis nut is made from 7075 aluminum with a clear anodized finish. Use it to lock the mating threaded component in place after final adjustment.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JNL10A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Jam Nut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 5\/8-18\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Left Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 7075 Aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Clear Anodized\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Jam Nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify the 5\/8-18 left hand thread callout before ordering. Final fitment depends on the mating rod end, link, or adjuster thread size and direction.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":53060631953632,"sku":"AVID-JNL10A","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/jamnuts-image-coming-soon_831b228c-25f8-4f04-85fe-30f66926b6b1.png?v=1782683134"},{"product_id":"avid-jnl12a","title":"JNL12A Jam Nut, 3\/4-16 Left Hand Thread, 7075 Aluminum, Clear Anodized | AVID Racing","description":"\u003ch2\u003eJNL12A Jam Nut, 3\/4-16 Left Hand Thread, 7075 Aluminum, Clear Anodized | AVID Racing\u003c\/h2\u003e\n\u003cp\u003eJNL12A is a jam nut for 3\/4-16 left hand threaded rod ends, links, and adjusters.\u003c\/p\u003e\n\u003cp\u003eThis nut is made from 7075 aluminum with a clear anodized finish. Use it to lock the mating threaded component in place after final adjustment.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JNL12A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Jam Nut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 3\/4-16\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Left Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 7075 Aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Clear Anodized\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Jam Nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify the 3\/4-16 left hand thread callout before ordering. Final fitment depends on the mating rod end, link, or adjuster thread size and direction.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":53060632019168,"sku":"AVID-JNL12A","price":3.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/jamnuts-image-coming-soon_091242c4-eed7-4c09-a86f-ad20564903f5.png?v=1782683139"},{"product_id":"avid-jnr10a","title":"JNR10A Jam Nut, 5\/8-18 Right Hand Thread, 7075 Aluminum, Clear Anodized | AVID Racing","description":"\u003ch2\u003eJNR10A Jam Nut, 5\/8-18 Right Hand Thread, 7075 Aluminum, Clear Anodized | AVID Racing\u003c\/h2\u003e\n\u003cp\u003eJNR10A is a jam nut for 5\/8-18 right hand threaded rod ends, links, and adjusters.\u003c\/p\u003e\n\u003cp\u003eThis nut is made from 7075 aluminum with a clear anodized finish. Use it to lock the mating threaded component in place after final adjustment.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JNR10A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Jam Nut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 5\/8-18\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 7075 Aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Clear Anodized\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Jam Nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify the 5\/8-18 right hand thread callout before ordering. Final fitment depends on the mating rod end, link, or adjuster thread size and direction.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":53060632051936,"sku":"AVID-JNR10A","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/jamnuts-image-coming-soon_ed320f4d-11a1-4cc8-9db9-8e0180c64383.png?v=1782683135"},{"product_id":"avid-jnr12a","title":"JNR12A Jam Nut, 3\/4-16 Right Hand Thread, 7075 Aluminum, Clear Anodized | AVID Racing","description":"\u003ch2\u003eJNR12A Jam Nut, 3\/4-16 Right Hand Thread, 7075 Aluminum, Clear Anodized | AVID Racing\u003c\/h2\u003e\n\u003cp\u003eJNR12A is a jam nut for 3\/4-16 right hand threaded rod ends, links, and adjusters.\u003c\/p\u003e\n\u003cp\u003eThis nut is made from 7075 aluminum with a clear anodized finish. Use it to lock the mating threaded component in place after final adjustment.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JNR12A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Jam Nut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 3\/4-16\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 7075 Aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Clear Anodized\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Jam Nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify the 3\/4-16 right hand thread callout before ordering. Final fitment depends on the mating rod end, link, or adjuster thread size and direction.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":53060632084704,"sku":"AVID-JNR12A","price":3.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/jamnuts-image-coming-soon_e26fe73f-4277-4b36-832e-7485c688af92.png?v=1782683141"},{"product_id":"avid-jnrm24x20","title":"JNRM24x20 Chromoly Steel Jam Nut, M24x2.0 Right Hand Thread | AVID Racing","description":"\u003ch2\u003eJNRM24x20 Chromoly Steel Jam Nut, M24x2.0 Right Hand Thread | AVID Racing\u003c\/h2\u003e\n\n\u003cp\u003eJNRM24x20 is a chromoly steel jam nut with an M24x2.0 right-hand thread. It is used with compatible right-hand threaded rod ends, heim joints, and related bearing-support assemblies that use this thread size.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for the jam nut only. Rod ends, misalignment spacers, mounting hardware, and other related components are not included unless listed separately.\u003c\/p\u003e\n\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JNRM24x20\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Chromoly steel jam nut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e M24x2.0\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Right hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chromoly steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One jam nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify thread size, thread direction, rod end compatibility, and application-specific hardware requirements before ordering. Final fitment depends on the threaded component and assembly being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":53060632117472,"sku":"AVID-JNRM24x20","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"ain08-f1-heavy-duty-precision-uniball-1-2-id-x-1-3-32-od-avid-racing","title":"AIN08-F1 Heavy Duty Precision Uniball, 1\/2\" ID x 1-3\/32\" OD | AVID Racing","description":"\u003ch2\u003eAIN08-F1 Heavy Duty Precision Uniball, 1\/2\" ID x 1-3\/32\" OD | AVID Racing\u003c\/h2\u003e\n\u003cp\u003eAIN08-F1 is a heavy duty precision uniball spherical bearing with a 1\/2\" inner diameter and 1-3\/32\" outer diameter. It is used for compatible bearing cups, housings, and fabricated mounting points sized for this bearing envelope.\u003c\/p\u003e\n\u003cp\u003eThis listing is for the bearing only. Cups, retaining rings, misalignment spacers, and mounting hardware are not included unless listed separately.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e AIN08-F1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Heavy duty precision uniball \/ spherical bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing ID:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing OD:\u003c\/strong\u003e 1-3\/32\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Width:\u003c\/strong\u003e .625\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall Diameter:\u003c\/strong\u003e .937\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 28,110 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e .110 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One uniball bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify the bearing ID, OD, bearing width, cup size, spacer stack, and installed width before ordering. Final fitment depends on the cup or housing, spacers, and application-specific hardware being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":53247221399776,"sku":"AVID-AIN08-F1","price":16.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/uniballs_01_1.png?v=1771591929"},{"product_id":"ain10-f1-heavy-duty-precision-uniball-5-8-id-x-1-5-16-od-avid-racing","title":"AIN10-F1 Heavy Duty Precision Uniball, 5\/8\" ID x 1-5\/16\" OD | AVID Racing","description":"\u003ch2\u003eAIN10-F1 Heavy Duty Precision Uniball, 5\/8\" ID x 1-5\/16\" OD | AVID Racing\u003c\/h2\u003e\n\u003cp\u003eAIN10-F1 is a heavy duty precision uniball spherical bearing with a 5\/8\" inner diameter and 1-5\/16\" outer diameter. It is used for compatible bearing cups, housings, and fabricated mounting points sized for this bearing envelope.\u003c\/p\u003e\n\u003cp\u003eThis listing is for the bearing only. Cups, retaining rings, misalignment spacers, and mounting hardware are not included unless listed separately.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e AIN10-F1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Heavy duty precision uniball \/ spherical bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing ID:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing OD:\u003c\/strong\u003e 1-5\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Width:\u003c\/strong\u003e .750\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall Diameter:\u003c\/strong\u003e 1.125\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 37,930 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e .165 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One uniball bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify the bearing ID, OD, bearing width, cup size, spacer stack, and installed width before ordering. Final fitment depends on the cup or housing, spacers, and application-specific hardware being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":53247221432544,"sku":"AVID-AIN10-F1","price":16.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/uniballs_01_1.png?v=1771591929"},{"product_id":"ain12-f1-heavy-duty-precision-uniball-3-4-id-x-1-1-2-od-avid-racing","title":"AIN12-F1 Heavy Duty Precision Uniball, 3\/4\" ID x 1-1\/2\" OD | AVID Racing","description":"\u003ch2\u003eAIN12-F1 Heavy Duty Precision Uniball, 3\/4\" ID x 1-1\/2\" OD | AVID Racing\u003c\/h2\u003e\n\u003cp\u003eAIN12-F1 is a heavy duty precision uniball spherical bearing with a 3\/4\" inner diameter and 1-1\/2\" outer diameter. It is used for compatible bearing cups, housings, and fabricated mounting points sized for this bearing envelope.\u003c\/p\u003e\n\u003cp\u003eThis listing is for the bearing only. Cups, retaining rings, misalignment spacers, and mounting hardware are not included unless listed separately.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e AIN12-F1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Heavy duty precision uniball \/ spherical bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing ID:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing OD:\u003c\/strong\u003e 1-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Width:\u003c\/strong\u003e .875\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall Diameter:\u003c\/strong\u003e 1.312\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 48,675 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e .252 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One uniball bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify the bearing ID, OD, bearing width, cup size, spacer stack, and installed width before ordering. Final fitment depends on the cup or housing, spacers, and application-specific hardware being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":53247221465312,"sku":"AVID-AIN12-F1","price":22.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/uniballs_01_1.png?v=1771591929"},{"product_id":"ain14-f1-heavy-duty-precision-uniball-7-8-id-x-1-1-2-od-avid-racing","title":"AIN14-F1 Heavy Duty Precision Uniball, 7\/8\" ID x 1-1\/2\" OD | AVID Racing","description":"\u003ch2\u003eAIN14-F1 Heavy Duty Precision Uniball, 7\/8\" ID x 1-1\/2\" OD | AVID Racing\u003c\/h2\u003e\n\u003cp\u003eAIN14-F1 is a heavy duty precision uniball spherical bearing with a 7\/8\" inner diameter and 1-1\/2\" outer diameter. It is used for compatible bearing cups, housings, and fabricated mounting points sized for this bearing envelope.\u003c\/p\u003e\n\u003cp\u003eThis listing is for the bearing only. Cups, retaining rings, misalignment spacers, and mounting hardware are not included unless listed separately.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e AIN14-F1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Heavy duty precision uniball \/ spherical bearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing ID:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing OD:\u003c\/strong\u003e 1-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Width:\u003c\/strong\u003e .875\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall Diameter:\u003c\/strong\u003e 1.312\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 48,675 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e .248 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One uniball bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify the bearing ID, OD, bearing width, cup size, spacer stack, and installed width before ordering. Final fitment depends on the cup or housing, spacers, and application-specific hardware being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":53247221498080,"sku":"AVID-AIN14-F1","price":31.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/uniballs_01_1.png?v=1771591929"},{"product_id":"avid-com12t-f1","title":"COM12T-F1 Chromoly Uniball, 3\/4\" ID x 1-7\/16\" OD | AVID Racing","description":"\u003ch2\u003eCOM12T-F1 Chromoly Uniball, 3\/4\" ID x 1-7\/16\" OD | AVID Racing\u003c\/h2\u003e\n\n\u003cp\u003eCOM12T-F1 is a chromoly uniball spherical bearing with a 3\/4\" inner diameter and 1-7\/16\" outer diameter. It is used for compatible bearing cups, housings, and fabricated mounting points sized for this bearing envelope.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for the bearing only. Cups, retaining rings, misalignment spacers, and mounting hardware are not included unless listed separately.\u003c\/p\u003e\n\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e COM12T-F1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Chromoly uniball \/ spherical bearing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing ID:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing OD:\u003c\/strong\u003e 1-7\/16\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing Width:\u003c\/strong\u003e .750\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall Diameter:\u003c\/strong\u003e 1.187\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 31,920 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e .204 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One uniball bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify the bearing ID, OD, bearing width, cup size, spacer stack, and installed width before ordering. Final fitment depends on the cup or housing, spacers, and application-specific hardware being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":53249492222176,"sku":"AVID-COM12T-F1","price":22.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/Uniballs-ImageComingSoon.png?v=1782680529"},{"product_id":"avid-com14t-f1","title":"COM14T-F1 Chromoly Uniball, 7\/8\" ID x 1-9\/16\" OD | AVID Racing","description":"\u003ch2\u003eCOM14T-F1 Chromoly Uniball, 7\/8\" ID x 1-9\/16\" OD | AVID Racing\u003c\/h2\u003e\n\n\u003cp\u003eCOM14T-F1 is a chromoly uniball spherical bearing with a 7\/8\" inner diameter and 1-9\/16\" outer diameter. It is used for compatible bearing cups, housings, and fabricated mounting points sized for this bearing envelope.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for the bearing only. Cups, retaining rings, misalignment spacers, and mounting hardware are not included unless listed separately.\u003c\/p\u003e\n\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e COM14T-F1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Chromoly uniball \/ spherical bearing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing ID:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing OD:\u003c\/strong\u003e 1-9\/16\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing Width:\u003c\/strong\u003e .875\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall Diameter:\u003c\/strong\u003e 1.312\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 41,960 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e .263 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One uniball bearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify the bearing ID, OD, bearing width, cup size, spacer stack, and installed width before ordering. Final fitment depends on the cup or housing, spacers, and application-specific hardware being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":53249492254944,"sku":"AVID-COM14T-F1","price":31.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/Uniballs-ImageComingSoon.png?v=1782680529"},{"product_id":"avid-jnl16s","title":"JNL16S Chromoly Steel Jam Nut, 1.25\" Left Hand Thread | AVID Racing","description":"\u003ch2\u003eJNL16S Chromoly Steel Jam Nut, 1.25\" Left Hand Thread | AVID Racing\u003c\/h2\u003e\n\n\u003cp\u003eJNL16S is a chromoly steel jam nut with a 1.25\" left-hand thread. It is used with compatible left-hand threaded rod ends, heim joints, and related bearing-support assemblies that use this thread size.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is for the jam nut only. Rod ends, misalignment spacers, mounting hardware, and other related components are not included unless listed separately.\u003c\/p\u003e\n\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JNL16S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Chromoly steel jam nut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 1.25\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Left hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Chromoly steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One jam nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify thread size, thread direction, rod end compatibility, and application-specific hardware requirements before ordering. Final fitment depends on the threaded component and assembly being used.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":53249528201440,"sku":"AVID-JNL16S","price":4.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/jamnuts_01_b881f7de-da9e-4f3a-816a-bd9ea5a0f8d2.png?v=1764046253"},{"product_id":"avid-jmxl16t","title":"JMXL16T 3-Piece Chromoly Rod End - 1-1\/4-12 LH Thread | AVID Racing","description":"\u003ch2\u003eJMXL16T 3-Piece Chromoly Rod End - 1-1\/4-12 LH Thread\u003c\/h2\u003e\n\u003cp\u003eJMXL16T is a 3-piece male chromoly rod end with a 1-1\/4-12 left-hand thread and a 1.000 inch bore.\u003c\/p\u003e\n\u003cp\u003eThis PTFE-lined rod end uses alloy-steel construction with a heat-treated, hard-chrome-plated ball and a heat-treated, zinc-plated and chromate-treated body and race.\u003c\/p\u003e\n\u003ch3\u003eKey Specs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JMXL16T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Rod End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing ID \/ Bore:\u003c\/strong\u003e 1.000 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing OD \/ Head Diameter:\u003c\/strong\u003e 2.950 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBearing Width \/ Ball Width:\u003c\/strong\u003e 1.375 in \/ 1.015 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBall Diameter \/ Ball Radius Reference:\u003c\/strong\u003e 1.875 in ball diameter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size \/ Pitch:\u003c\/strong\u003e 1-1\/4-12\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction:\u003c\/strong\u003e Left-hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Length:\u003c\/strong\u003e 2.500 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenterline Length:\u003c\/strong\u003e 4.500 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMisalignment Angle:\u003c\/strong\u003e 17 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStatic Radial Load Rating:\u003c\/strong\u003e 107,182 lb\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Alloy steel \/ chromoly rod-end construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Zinc-plated chromate body and race; hard-chrome-plated ball\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e 3-piece male rod end, PTFE lined\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApprox. Weight:\u003c\/strong\u003e 2.74 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eVerify thread size, thread direction, bore size, and required misalignment before ordering. Final fitment depends on the mating hardware, mounting width, and application geometry.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":53250415591648,"sku":"AVID-JMXL16T","price":59.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/rodends_01_1.png?v=1773765616"}],"url":"https:\/\/avidrace.com\/collections\/v2-utv-rod-ends-uniballs-and-bearing-components.oembed","provider":"AVID Racing","version":"1.0","type":"link"}