{"title":"V2 - Can-Am Maverick R Knuckles, Hubs and Brake Components","description":null,"products":[{"product_id":"avid-mrvr-bup-kit01","title":"Can-Am Maverick R Baja Race 7075-T6 Billet Uprights \/ Knuckle","description":"\u003ch2\u003eCan-Am Maverick R Baja Race 7075-T6 Billet Uprights \/ Knuckle\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAVID Racing Can-Am Maverick R Baja Race 7075-T6 Billet Uprights\u003c\/strong\u003e are the core of our Maverick R RACE front suspension system. CNC machined from \u003cstrong\u003e7075-T6 billet aluminum\u003c\/strong\u003e with vertical uniballs in true double shear, these uprights carry all of the corrected geometry: KPI, scrub radius, caster, and camber gain. The result is a Maverick R that feels precise and stable at high speed.\u003c\/p\u003e\n\u003cp\u003eThese billet uprights are designed to work with the complete \u003ca href=\"https:\/\/avidrace.com\/products\/avid-mavr-frk\" title=\"AVID Racing Can-Am Maverick R Baja Race Front Control Arm Kit\"\u003e\u003cstrong\u003eAVID Maverick R Baja\u003c\/strong\u003e\u003c\/a\u003e or RACE front kit and must be installed as part of the full system. Compared to our \u003ca href=\"https:\/\/avidrace.com\/products\/avid-mavr-srup-kit01\" title=\"AVID Racing Can-Am Maverick R Baja Race Chromoly Uprights\"\u003e\u003cstrong\u003echromoly upright\u003c\/strong\u003e\u003c\/a\u003e, this 7075-T6 billet version is approximately \u003cstrong\u003e20 percent lighter\u003c\/strong\u003e while also increasing stiffness and strength.\u003c\/p\u003e\n\u003cp\u003eThe lower pivot uses the same location as the factory upright, which means these uprights can be used with some third party lower control arms that run a vertical bearing or uniball at the lower mount. The upper control arm must either be an AVID arm or a custom arm built to match our geometry and uniball configuration.\u003c\/p\u003e\n\u003ch3\u003eWhat This Means on the Car\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSharper steering and turn in:\u003c\/strong\u003e Correct KPI and scrub radius keep the tire planted and reduce steering effort at speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMore stability in the rough:\u003c\/strong\u003e Improved camber and caster control give the front end a planted, predictable feel through whoops, ruts, and landings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighter and stronger:\u003c\/strong\u003e 7075-T6 billet construction is about 20 percent lighter and significantly stronger than both chromoly and OEM cast uprights.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower arm compatibility:\u003c\/strong\u003e Can be paired with third party lower arms that use a vertical bearing or uniball at the factory style lower pivot, with an AVID or custom upper arm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined from high strength \u003cstrong\u003e7075-T6 billet aluminum\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eVertical \u003cstrong\u003e1 inch uniballs\u003c\/strong\u003e in true double shear\u003c\/li\u003e\n\u003cli\u003eGeometry tuned for corrected KPI, scrub radius, caster, and camber gain\u003c\/li\u003e\n\u003cli\u003eDesigned to work with AVID Maverick R Baja and RACE front control arm and steering kits\u003c\/li\u003e\n\u003cli\u003eShares the factory lower pivot location for compatibility with select third party lower arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIncluded in Kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLeft and right 7075-T6 billet front uprights\u003c\/li\u003e\n\u003cli\u003eMatched misalignment spacers\u003c\/li\u003e\n\u003cli\u003eHardware for upright assembly where applicable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBottom line:\u003c\/strong\u003e The AVID Maverick R Baja Race 7075-T6 Billet Uprights deliver the full RACE front end geometry with maximum strength, reduced weight, and precise steering feel for serious Maverick R builds.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":48472543330528,"sku":"AVID-MRVR-BUP-KIT01","price":5750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/AVID-MR_BUP1_05.png?v=1766678521"},{"product_id":"avid-mavr-srup-kit01","title":"Can-Am Maverick R Baja Race 4130 Chromoly Uprights \/ Knuckle | AVID Racing","description":"\u003ch2\u003eCan-Am Maverick R Baja Race Chromoly Uprights\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAVID Racing Can-Am Maverick R Baja Race Chromoly Uprights\u003c\/strong\u003e deliver the same corrected front end geometry as our billet uprights in a high strength, cost conscious package. Built from precision cut and TIG welded \u003cstrong\u003e4130 chromoly plate\u003c\/strong\u003e with vertical uniballs in true double shear, these uprights carry the AVID RACE numbers for KPI, scrub radius, caster, and camber gain so the Maverick R feels precise and stable at high speed.\u003c\/p\u003e\n\u003cp\u003eEven though these uprights are plate construction, they are held to the same standard as our billet products. All critical bolt pivot points use \u003cstrong\u003efully machined steel bosses\u003c\/strong\u003e so the bolt shank locates perfectly in shear and the suspension can cycle with precise, repeatable movement. The product images highlight these machined components to show the load paths, strength, and attention to fitment.\u003c\/p\u003e\n\u003cp\u003eThese chromoly uprights are designed to work with the complete \u003ca href=\"https:\/\/avidrace.com\/products\/avid-mavr-frk\" title=\"AVID Racing Can-Am Maverick R Baja Race Front Control Arm Kit\"\u003e\u003cstrong\u003eAVID Maverick R Baja\u003c\/strong\u003e\u003c\/a\u003e or RACE front kit and must be installed as part of the full system. They provide a very strong and reliable option that is significantly stronger than the factory cast upright while keeping overall project cost under control.\u003c\/p\u003e\n\u003cp\u003eThe lower pivot uses the same location as the factory upright, which means these uprights can be used with some third party lower control arms that run a vertical bearing or uniball at the lower mount. The upper control arm must either be an AVID arm or a custom arm built to match our geometry and uniball configuration.\u003c\/p\u003e\n\u003ch3\u003eWhat This Means on the Car\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSharper steering and turn in:\u003c\/strong\u003e Correct KPI and scrub radius help the tire stay planted and reduce steering effort at speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMore stability in the rough:\u003c\/strong\u003e Improved camber and caster control give the front end a planted, predictable feel through whoops, ruts, and landings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBig strength upgrade over stock:\u003c\/strong\u003e 4130 chromoly construction, machined steel pivot bosses, and double shear uniball mounting resist flex and cracking far better than OEM cast uprights.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower arm compatibility:\u003c\/strong\u003e Can be paired with third party lower arms that use a vertical bearing or uniball at the factory style lower pivot, with an AVID or custom upper arm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabricated from high strength \u003cstrong\u003e4130 chromoly plate\u003c\/strong\u003e, precision cut and TIG welded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachined steel pivot bosses\u003c\/strong\u003e at all bolt locations for proper shank fit and shear support\u003c\/li\u003e\n\u003cli\u003eVertical \u003cstrong\u003e1 inch uniballs\u003c\/strong\u003e in true double shear\u003c\/li\u003e\n\u003cli\u003eGeometry tuned for corrected KPI, scrub radius, caster, and camber gain\u003c\/li\u003e\n\u003cli\u003eDesigned to work with \u003ca href=\"https:\/\/avidrace.com\/products\/avid-mavr-frk\" title=\"AVID Racing Can-Am Maverick R Baja Race Front Control Arm Kit\"\u003eAVID Maverick R Baja\u003c\/a\u003e and RACE front control arm and \u003ca href=\"https:\/\/avidrace.com\/products\/avid-mrra-kit1\" title=\"Can-Am Maverick R Steering Clevis Adapter Kit – Inner Tie Rod Upgrade\"\u003esteering kits\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eShares the factory lower pivot location for compatibility with select third party lower arms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIncluded in Kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLeft and right 4130 chromoly front uprights\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMatched misalignment spacers\u003c\/li\u003e\n\u003cli\u003eHardware for upright assembly where applicable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBottom line:\u003c\/strong\u003e The AVID Maverick R Baja Race Chromoly Uprights give you full RACE front end geometry and a major strength increase over stock, with plate construction and machined pivot details that meet the same standard as our billet parts.\u003c\/p\u003e","brand":"AVID Racing","offers":[{"title":"Default Title","offer_id":48472557650144,"sku":"AVID-MAVR-SRUP-KIT01","price":2950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0704\/2862\/3072\/files\/AVID-MAVR-SRUP-KIT01_7.png?v=1776392133"}],"url":"https:\/\/avidrace.com\/collections\/v2-maverick-r-knuckles-hubs-and-brake-components.oembed","provider":"AVID Racing","version":"1.0","type":"link"}